Moto Watchdog Support & How It Works
Quick setup. Real-time tracking. Smart alerts. Built for families and fleets that want visibility without monthly fees.
Install → confirm power → drive 5–10 minutes → create your first geofence → enable notifications.
How It Works
Moto Watchdog connects your vehicle to your dashboard so you can see location, trips, and alerts automatically.
-
1) Install the tracker
Choose OBD for quick plug-in installs or hardwire for discreet, tamper-resistant mounting.
-
2) Activate and connect
Once powered, your device connects and begins reporting location (first update typically appears after a short drive).
-
3) Track, review trips, and set alerts
Monitor live position, view trip history, and configure geofences, curfews, and speed notifications.
-
4) Add more vehicles anytime
Manage multiple vehicles from one dashboard and standardize alerts for your household or fleet.
Setup Guides
OBD Plug-In Setup
Plug into the OBD-II port (usually under the steering column). Start the vehicle and drive 5–10 minutes to allow the first GPS lock.
Best for: personal vehicles, fast installs, easy swaps.
Hardwired Setup
Connect to constant power and ground for consistent reporting. Ideal for discreet installs and vehicles where plug-in access is limited.
Best for: fleets, theft prevention, long-term installs.
Confirm power → move to an open area → drive 5–10 minutes. If still not visible, re-check wiring/OBD seating and contact support.
Alerts & Rules
Use alerts to stay informed without checking the app constantly.
Geofences
Create zones around job sites, home, or customer locations. Get enter/exit notifications automatically.
Curfews
Set “allowed driving hours” and get alerted when a vehicle moves outside those hours.
Speed Alerts
Choose a threshold and get notified when it’s exceeded—great for teen drivers and fleet safety.
Movement / Tow Alerts
Get notified when a parked vehicle moves unexpectedly (useful for theft awareness).
Low Battery / Power Events
Know when a device loses power or reconnects (especially helpful for hardwired installs).
Multi-Vehicle Management
Standardize rules across vehicles so your team gets consistent alerts and reports.
Troubleshooting
No location updates
Confirm the device has power, move to an open area, and drive 5–10 minutes. Underground garages and dense urban areas can slow the first GPS lock.
Location seems delayed
Refresh the dashboard, confirm the vehicle is moving, and check notification settings. Some devices reduce update frequency when stopped to conserve power.
Geofence not triggering
Make the zone slightly larger, ensure enter/exit toggles are enabled, and confirm app notifications are allowed on your phone.
Hardwired install questions
Verify constant power and ground connections. If the device reboots or disconnects, it’s often due to intermittent power.
FAQ
Is Moto Watchdog subscription-free?
Yes. The goal is simple: buy once and track without recurring monthly fees.
How long does setup take?
Most installs take minutes. After powering on, drive 5–10 minutes for the first location update.
Can I track multiple vehicles?
Yes. Add and manage multiple vehicles from one dashboard, with alerts per vehicle.
Do geofences and curfews send notifications?
Yes—when enabled. Also ensure your phone/browser allows notifications for Moto Watchdog.
What affects GPS accuracy?
Signal conditions (garage, tunnels, dense areas) can impact GPS lock and update timing. Open sky improves accuracy and speed.